ATF Standalone SD Repair, SX-4!! v6.60 Update!! 08 Feb 11!!
Common Changes:
Before Updating your Box Firmware to LogiCore 9.02.10, make sure you have:
1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications
2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications
3. DO NOT disable the Microsoft Windows Firewall!!!
4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List
5. Make sure you have done Steps 1-2-3-4
For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use "Old Loaders" for Flashing.
Using "New Loaders" for N95 flashing is 100% safe, but depending on your CABLE QUALITY,
you might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE (Ready)".
If you do get stuck, then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection --> Old Loaders
__________________________________________________ ________________________
[b]ATF Standalone SD Repair, SX-4!! v6.60 Update!! Public discussion thread:[/b]
[You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]
Bangladesh: [You must be registered and logged in to see this link.]
Chinese Support forum : [You must be registered and logged in to see this link.]
The Master Piece
Common Changes:
- New LogiCore 9.02.10 Firmware for ATF Chrome (Big ATF) and ATF Lightning (Small ATF)
- Updated Nokia.ini with very old and very new Phone listings
- New Nokia Connectivity Driver 7.1.36.00
- Update Important Files Button is now RE-Activcated (Updates Loaders, PM, DCC files etc...)
- Built-In Log File Viewer can now View the Current Session
- Full Package Flash File Download Server automatically selects non BUSY servers
- Fixed USER.INI files loading Bug (This also fixes Manually Loaded flash files)
- Added Manual Selection of BOX TYPE for Restore Box Function
- Updated the SKINS for the Software Interface
- Stand-Alone Super Dongle Keys Repair for all phones with Supported HASH
- Stand-Alone SX-4 Authorization for all phones with Supported HASH
- FBUS Loaders Updated to Release 10.50.000.1
- Original Dynamic camera Configuration Files (DCC) Compatibility
- Automatically Fixes DCC Problems using Original DCC files (not PM Files)
- Erase Flash Chip can now SCAN active Flash Chips and automatically Erases Selected Flash Chips
- CMT and APE PAPUBKEYS are now Compared during Buscheck (just in case it was damaged by other Boxes)
- Flash Loader Information (Version, Revision, Protocol Type) are now Displayed during Buscheck
- Added Manual ERASE PM 1 and PM 309 file: ERASE_1_309.pm
- Added New Detection Method for 64k page Flash Chips for 5130c, 3110c etc...
- By Default, RAP3Gv30 New Loaders are not used unless ENABLED in Expert Settings Menu
- Fixed Old Protocol + Old Loaders flashing for N95, N95-8GB and other Phones with Secondary APE CPU
- Backup Certificates (RPL) for APE Subsystem is now Enabled
- Now Supports EMMC Flashing for N900 RX-51 Variants
- C1-01 and other Infineon USB Phones can now be flashed with PPM and CNT files only. This will save you some time if you want to skip MCU Flashing. Just make sure that the currect MCU Firmware version matches the PPM and CNT files you want to upload. Actually, you can skip CNT flashing as well if you only want to change the Language Pack.
- Original Dynamic camera Configuration Files (DCC) Compatibility
- Automatically Fixes DCC Problems using Original DCC files (not PM Files)
Before Updating your Box Firmware to LogiCore 9.02.10, make sure you have:
1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications
2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications
3. DO NOT disable the Microsoft Windows Firewall!!!
4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List
5. Make sure you have done Steps 1-2-3-4
For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use "Old Loaders" for Flashing.
Using "New Loaders" for N95 flashing is 100% safe, but depending on your CABLE QUALITY,
you might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE (Ready)".
If you do get stuck, then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection --> Old Loaders
__________________________________________________ ________________________
[b]ATF Standalone SD Repair, SX-4!! v6.60 Update!! Public discussion thread:[/b]
[You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]
Bangladesh: [You must be registered and logged in to see this link.]
Chinese Support forum : [You must be registered and logged in to see this link.]
The Master Piece