by digital_amit Wed 18 May 2011, 5:35 pm=======================
N70 no signal solution (water damage)
=======================
STEP BY STEP BY PICTURES
IT'S NOT A NEW SOLUTION I JUST WORKED AND GIVEN DONE REPORT MAY BE IT WILL HELP SOMEONE TO DO THIS IT'S WORNING 100%.
WHEN YOU EXAMINE THE BOARD CAREFULLY YOU WILL FIND J7506 IS DAMAGE.AS SHOWN IN PICTURE.
[You must be registered and logged in to see this image.]
SEE LCD BACK SIDE YOU WILL FIND BLACK SPOT ON THE BACK SID OF LCD.
[You must be registered and logged in to see this image.]
IF J7506 IS DAMAGE YOU CAN GET IT'S TRACK FROM N7501 (VINKU) JUST REMOVE IT AND SOLDER A JUMPER WIRE LIKE PICTURE.
[][You must be registered and logged in to see this image.]
NOW PLACE VINKU CAREFULLY AS YOU ARE SEEING IN PICTURE.
][You must be registered and logged in to see this image.]
[]IF YOU PLACED THE VINKU SUCCESSFULLY YOU WILL GET FULL SIGNAL ON THE PHONE.
[You must be registered and logged in to see this image.]
]IF YOU LIKE THE POST DON'T FORGET TO PRES THANKS
N70 no signal solution (water damage)
=======================
STEP BY STEP BY PICTURES
IT'S NOT A NEW SOLUTION I JUST WORKED AND GIVEN DONE REPORT MAY BE IT WILL HELP SOMEONE TO DO THIS IT'S WORNING 100%.
WHEN YOU EXAMINE THE BOARD CAREFULLY YOU WILL FIND J7506 IS DAMAGE.AS SHOWN IN PICTURE.
[You must be registered and logged in to see this image.]
SEE LCD BACK SIDE YOU WILL FIND BLACK SPOT ON THE BACK SID OF LCD.
[You must be registered and logged in to see this image.]
IF J7506 IS DAMAGE YOU CAN GET IT'S TRACK FROM N7501 (VINKU) JUST REMOVE IT AND SOLDER A JUMPER WIRE LIKE PICTURE.
[][You must be registered and logged in to see this image.]
NOW PLACE VINKU CAREFULLY AS YOU ARE SEEING IN PICTURE.
][You must be registered and logged in to see this image.]
[]IF YOU PLACED THE VINKU SUCCESSFULLY YOU WILL GET FULL SIGNAL ON THE PHONE.
[You must be registered and logged in to see this image.]
]IF YOU LIKE THE POST DON'T FORGET TO PRES THANKS
