Medusa Box v. 1.1.3 is out!
Medusa Box v. 1.1.3 Release Notes:
To resurrect devices perform the following steps:
_____________
Deep in the boot
WBR,
Medusa Box Team
Medusa Box v. 1.1.3 Release Notes:
- Added support for Qualcomm MSM7600 Mobile processor
- Added support for following phone models:
- HTC Imagio - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- HTC Topaz - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- HTC myTouch 3G (Espresso) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- Samsung SCH-W300 - added Dead Boot Repair
- Samsung SCH-W570 - added Dead Boot Repair
- Samsung SCH-W770 - added Dead Boot Repair
To resurrect devices perform the following steps:
- Solder JTAG cable to JTAG testpoints as explained in the manual;
- Make sure that correct model has been selected from the models list;
- Set Jtag speed to Auto (RTCK);
- Select the EasyRepair mode;
- Press the EasyRepair button and follow Wizard instructions;
- After
operation is successfully finished make sure that new device appears in
PC Device Manager to make sure that it has been recovered. - Desolder JTAG wires.
_____________
Deep in the boot
WBR,
Medusa Box Team